BSP: Plates
Rationalised sizes of Plates from Plate Mill
|
Length
mm |
|
Thickness
mm
|
Width
mm
|
|
1600 |
1800 |
2000 |
2200 |
2500 |
2800 |
3000 |
3200 |
|
8 |
|
|
|
|
6300
9300
12500
|
|
|
|
|
10 |
|
|
|
9300 |
6300
9300
12500
|
|
|
|
|
12 |
|
|
6300
9300
12500
|
6300
9300
12500
|
6300
8000
12500
|
7100
10000 |
|
|
|
14 |
|
|
|
9300 |
5600
6300
7100
9000
9300
12500
|
5000
5600
6300
7100
8000
9000
12500
|
|
|
|
16 |
|
|
7100
9300
|
5600
7100
9000
9300
12500
|
5000
6300
8000
9000
12500
|
5600
7100
8000
10000
|
|
|
|
18 |
|
5600
7100
9300
|
5600
6300
7100
8000
9000
9300
12500
|
5000
6300
8000
9000
12500
|
5600
7100
8000
10000 |
5000
6300
9000
9300
10000 |
|
|
|
20 |
5600
7100
9300 |
5000
5600
6300
7100
9000
9300
12500 |
5000
5600
6300
8000
9000
12500 |
5600
7100
8000
10000 |
5000
6300
9000
9300
10000 |
5600
8000
9000
9300 |
|
|
|
22 |
5000
5600
6300
7100
9000
9300
12500 |
5000
5600
6300
8000
9000
12500 |
5600
7100
8000
10000 |
5000
6300
7100
9300
10000 |
5600
6300
8000
9000
9300 |
5000
5600
7100
8000
9300 |
|
|
|
25 |
5000
5600
6300
8000
12500 |
5000
5600
7100
10000 |
5000
6300
9000
9300
10000 |
5600
6300
8000
9000
9300 |
5000
5600
7100
8000 |
6300
7100
12500 |
6300
12500
|
5600
6300
12500 |
|
28 |
5000
5600
7100
10000 |
5000
6300
9000
9300
10000 |
5600
8000
9000
9300 |
5000
5600
7100
8000 |
6300
7100
12500 |
5600
6300
12500 |
5600
6300
10000
12500 |
5000
5600
9300
10000 |
|
32 |
5000
6300
9000
9300
10000
|
5000
5600
8000
9000 |
5000
7100
8000 |
5000
6300
7100
12500 |
5600
6300
12500 |
5000
5600
9300
10000 |
5000
9000
9300
10000 |
5000
8000
9000
9300
10000 |
|
36 |
5000
5600
8000
9000 |
5000
7100
8000 |
6300
7100
12500 |
5600
6300
12500 |
5000
5600
9300
10000 |
5000
8000
9000
9300
|
8000
9000
9300 |
7100
8000
9000 |
|
40 |
5000
7100
8000 |
6300
7100
12500 |
5600
6300
12500 |
5000
5600
10000 |
5000
9000
9300
10000 |
7100
8000
9000
9300
10000 |
7100
8000 |
6300
7100
8000 |
|
45 |
6300
7100
12500 |
5600
6300
12500 |
5000
5600
10000 |
5000
9300
10000 |
8000
9000
9300 |
7100
8000 |
6300
7100 |
6300
7100 |
|
50 |
5600
6300
12500 |
5000
5600
9300
10000 |
5000
9000
9300
10000 |
8000
9000
9300 |
7100
8000 |
6300
7100 |
5600
6300
7100 |
5600
6300 |
|
56 |
5000
5600
9300
10000 |
5000
9300
10000 |
8000
9000
9300 |
7100
8000 |
6300
7100 |
5600
6300 |
5000
5600 |
5000
5600 |
|
63 |
4500
5000
9000
9300
10000
|
8000
9300 |
7100
8000 |
6300
7100 |
5600
6300 |
5000
5600 |
4500
5000 |
4500
5000 |
|
75 |
7100
8000 |
6300
7100 |
5600
6300 |
5000
5600 |
4500
5000 |
4500
5000 |
4500 |
|
|
80 |
6300
7100
8000 |
5600
6300
7100 |
5000
5600
6300 |
4500
5000
5600 |
4500
5000 |
|
|
|
|
90 |
6300 |
5600
6300 |
5000
5600 |
5000 |
|
|
|
|
|
100 |
5000
5600
6300 |
5000
5600 |
5000 |
|
|
|
|
|
|
110 |
5000
5600 |
5000 |
|
|
|
|
|
|
|
120 |
4500
5000 |
|
|
|
|
|
|
|
|
|
|
Note: Plates above 40 mm will be
flame cut.
Plates are manufactured
at Bhilai Steel Plant
as per following
specifications:
IS 2062/1999 Grades B, C; IS
1977/ 1996; ASTM-A-36M; SAILMA, 300HI/350HI/ 410HI/ 450 HI;
IS 2002/ 1992; ASTM-A-588M Grade A; ASTM-A-515/ 516 M, Grades
60/65/70; ASTM-A-204M Grade B; ASTM-A-537M Class I; BS 1501/
EN 10028; SAILHARD; ABS Grade A; Lloyds Grades A, B; NCD 1431;
NE S 791; GOST 5521; DIN 17100; DIN 17155; API 5L A, B, X-42,
X-46, X-52, X-56, X-60, X-65; IS 8500/ 1992; IS 5986/ 1992;
SAILCOR/ IRSM-41; IS 3039/ 1988
For
Specifications click here
|
|
Specification
|
Application
|
|
IS: 2062/ 1999 (Grades A,B,C),
ASTM-A-36 M,
DIN 17100, IS 1977/ 1996
|
General structurals
|
|
IS:5986/ 1992, Fe 330, 360,
410, 510
|
Flanging and forming operations
|
|
IRS M-41, SAILCOR, ASTM-A-588
M
IS 2062 with copper
|
Atmospheric corrosion resistance
|
|
SAIL BOILER
IS 2002/ 1992, ASTM-A-285
M (Grade C), ASTM-A-515 M, ASTM-A-516 M, ASTM-A-517 M (Grade
F), ASTM-A-537 M (Class 1), ASTM-A-204 (Grade B), DIN 17155
(Grade H1), EN 10028, BS 1501
|
Boilers and pressure vessels
|
|
ASTM-A-517 (Grade F)
|
Penstock and high degree of abrasion
resistance applications
|
|
SAILHARD
|
Abrasion Resistant
|
|
SAILMA 300, 350,410, 450,
IS:8500/1992,
DIN 17100 52.3
|
High Tensile
|
|
SAIL MARINE
IS: 3039, Lloyds Grade
A, B, ABS Grade A,
NCD 1431
|
Ship Building
|
|
API 5L, Grade A, B, X42, X46,
X52, X56 X60, X65
|
Oil and gas pipeline manufacturing
|
| |
|
Rolling
and cutting tolerance for plates (as per IS 1852/85)
Width
The tolerances on width of plate shall be as follows:
|
| |
|
Length
mm
|
Width
mm
|
Thickness
mm
|
Tolerance on Width
|
|
Up to and
including 8000
|
Up to and
including 2000
|
Up to and
including 20
Over 20
|
- 0
+10mm
-0, +15 mm
|
|
Up to and
including 8000
|
Over 2000
|
Up to and
including 20
Over 20
|
- 0
+0.5 % of width
-0, +20 mm
|
|
Over 8000
|
All widths
|
Up to and
including 20
Over 20
|
- 0
+ 0.2 % of length
- 0
+ 0.3 % of length
|
| |
Note 1: Plates over 32
mm in thickness may be supplied with either as rolled or gas-cut
edges. In case of Bhilai plates, above 40 mm thick plates
shall be supplied with flame cut edges.The tolerances on width in such
cases shall be subject to arrangement between the purchaser
and the supplier.
Note 2 :
In case plates below 32 mm in thickness are supplied in as-
rolled condition the tolerances shall be mutually agreed to
between the purchaser and the supplier.
|
| |
Thickness
The tolerances on thickness
shall be as follows:
|
| |
|
Thickness
|
Tolerance in percentage
of nominal Thickness
|
|
Less than 8 mm
|
+12.5, - 5.0
|
|
From 8 mm up to
& including 12 mm
|
+7.5,
- 5.0
|
|
Over 12mm
|
± 5.0
|
| |
The thickness shall be measured
at the following points
(a) One at each corner of the
plate.
(b) One in the middle of the
width, and
(c) One in the middle of the
length.
These measurements
shall be 25 mm away from the edge and at points randomly chosen.
The thickness measured at each of these points shall satisfy
the tolerances specified above.
Length
The tolerances on length of
plate produced in non- continuous mill shall be as follows:
|
| |
|
Length
mm
|
Thickness
mm
|
Tolerance on length
|
|
Over
|
Up to and including
|
|
|
|
--------
|
2200
|
Up to and
including 20
Over 20
|
-0 +10 mm
- 0, +15 mm
|
|
2200
|
3000
|
Up to and
including 20
Over 20
|
-0 +0.5%
- 0, +15 mm
|
|
3000
|
6300
|
Up to and
including 20
Over 20
|
-0 +0.5 %
- 0, +0.5 %
|
|
6300
|
8000
|
Up to and
including 20
Over 20
|
-0 +35 mm
-0, +0.5 %
|
|
8000
|
------
|
Up to and
including 20
Over 20
|
-0 +35 mm
- 0, +40 mm
|
| |
| The tolerance for length of plates
from 5 to 10 mm thickness when produced in continuous mill shall
be as follows: |
| |
|
Length
mm
|
Tolerance
|
|
Up to and including 2500
|
+25 mm, -0 mm
|
|
Over 2500
|
+1 percent of the length subject
to a maximum of 70 mm,- 0 mm
|
| |
Note:
Plates over 32 mm in thickness
may be supplied with either as-rolled or gas-cut edges.
In case of Bhilai plates, above 40 mm thick plates shall be supplied
with flame cut edges.
The length tolerance in such
cases shall be subject to agreement between the purchaser and
the supplier. |
|
