RSP : Plates

RSP : Wide & Heavy Plates

Rationalised sizes of Plates from Plate Mill

Length mm
Thickness mm	Width mm
Thickness mm	1500/ 1600	2000	2500
8,10, 12	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500
14, 16, 18 20	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10,000 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500
22, 25	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10,000 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500
28	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000
32	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000, 12500	4500, 5600 6300, 7100, 8000
36	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000	5600 6300, 7100, 8000
40	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300 10000, 12500	4500, 5000, 5600, 6300, 7100, 8000, 9000	5600, 6300, 7100
45	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000	5600, 6300, 7100, 8000	5600, 6300
50	4500, 5000, 5600, 6300, 7100, 8000, 9000, 9300, 10000	5600, 6300, 7100, 8000	5000, 5600
56	4500, 5000, 5600, 6300, 7100, 8000,	5600, 6300
63	5600, 6300, 7100, 8000	5600

Note:

(1) For 8 mm order acceptable in minimum width of 1600 mm.

(2) For normalised plates minimum length to be 6300 mm.

(3) Plates can be supplied with random ultrasonic testing
(offline) up to maximum 50 mm thickness.

(4) Plates in other sizes can be supplied as per mutual
agreement.

Packing & Supply Condition
Plates are supplied in bare packaging condition. Plates are normalised as per the requirements of specification. Thickness wise supply conditions are mentioned here:

Thickness
mm

Supply Condition

8 -20 mm

Sheared condition

>20-63 mm

With gas cut edges

Rationalised sizes of Plates from Hot Strip Mill

Thickness mm	Width mm	Length mm
5, 6, 7, 8, 9, 10	1000,1250, 1400	5000, 6300, 10000
Size of Chequered Plates of RSP
5, 6, 7, 8, 9, 10	900 to 1200,1201 to 1350	5000,10000

Note:

(1) Plates are supplied in Mill Edge conditions (Width +20 to +50mm)

(2) Chequered plates are supplied in Tear Drop Pattern

Plates are manufactured by Rourkela Steel Plant
as per following specifications:

IS 2062/ 1999 Grades B, C: ASTM-A-36M; SAILMA; 300HI/ 350HI/ 450 HI; Wheels; Lloyds Grades A, B, D; IS 2002/ 1992;
ASTM-A-285 M Grade C; Dead Soft Quality; LO-Pearl; IS 8500/ 1992;
IS 5986/ 1992; IS 3502; ASTM-A-517, Grade F; IS 3039/ 1988; SAPH 440; ASTM-A-537 M Cl I; ASTM-A-515/ 516 M Grades 60/65/70
BSK-46, API 5L grade A/B/ X46, X52, X56, X60, X65, DIN 42.2, 52.3

For Specifications click here

Applications

Specifications

Applications

IS: 2062/ 1999 (Grades B,C),

ASTM-A-36 M, DIN 17100, IS 1977/ 1996

General structurals

ASTM-A-517 (Grade F)

Penstock and high degree of abrasion resistance applications

SAILMA 300, 350,410, IS:8500/1992,

DIN 17100 52.3

High Tensile

Chequered Plates conforming to IS 3502/ 1994*

Industrial Flooring

Dead Soft Quality

Galvanising Pots

BSK-46, E34, E38, SAPH 440

Fabrication of long members in auto sector

API 5L grade A, B, X46, X52, X60, X65

Pipe making

* Base material as per IS 2062/ 1999 and IS 1977/ 1996.

Rolling and cutting tolerance for plates (as per IS 1852/85) with trimmed/
gas cut edges

Width
The tolerances on width of plate shall be as follows

Length
mm

Width
mm

Thickness
mm

Tolerance on Width

Up to and

including 8000

Up to and

including 2000

Up to and

including 20

Over 20

+10mm

+15 mm

Up to and

including 8000

Over 2000

Up to and

including 20

Over 20

+0.5 % of width

+20 mm

Over 8000

All widths

Up to and

including 20

Over 20

+ 0.2 % of length

+ 0.3 % of length

Note 1: Plates over 20 mm in thickness may be supplied with either as rolled or gas-cut edges.

Thickness
The tolerances on thickness shall be as follows:

Thickness

Tolerance in percentage of nominal Thickness

Less than 8 mm

+12.5, - 5.0

From 8 mm up to

& including 12 mm

+7.5,

- 5.0

Over 12mm

± 5.0

The thickness shall be measured at the following points

(a) One at each corner of the plate.

(b) One in the middle of the width, and

(c) One in the middle of the length.

These measurements shall be 25 mm away from the edge and at points randomly chosen. The thickness measured at each of these points shall satisfy the tolerances specified above.

Length
The tolerances on length of plate produced in non- continuous mill shall be as follows :

Length mm

Thickness mm

Tolerance on length

Over

Up to and including

--------

2200

Up to and

including 20

Over 20

-0 +10 mm

- 0, +15 mm

2200

3000

Up to and

including 20

Over 20

-0 +0.5%

- 0, +15 mm

3000

6300

Up to and

including 20

Over 20

-0 +0.5 %

- 0, +0.5 %

6300

8000

Up to and

including 20

Over 20

-0 +35 mm

-0, +0.5 %

8000

------

Up to and

including 20

Over 20

-0 +35 mm - 0, +40 mm

The tolerance for length of plates from 5 to 10 mm thickness when produced in continuous mill shall be as follows

Length
mm

Tolerance

Up to and including 2500

+25 mm, -0 mm

Over 2500

+1 percent of the length subject to a maximum of 70 mm, - 0 mm