Mild Steel Plate Mill Plates BSP

Exports
Producing Plant : Bhilai Steel Plant
Specification : Mild Steel
Thickness Range in mm
  ASTM A 36/ASME SA 36M
10 to 80 (*)
  BS-4360 Grade 43A/B
10 to 80
  JIS-G-3101-SS400
DIN-17100 RST 37.20/ST 44.2
BSEN 10025 S 275 JR/S235 JR/235 JR G2/235 JR
ASTMA 283 M/ASME SA 283 M Grade A/B/C/D
JIS-G-3101-SS490
AS3678 Grade 250
}
 10 to 80
  Ship Building Quality  
  ABS Grade A with ABS Certification
10 to 50.8
  LRS Grade A with Lloyds Certification
10 to 40
  LRS Grade B with Lloyds Certification
10 to 40
  High Tensile  
  ASTM A 572 M Grade 42/50 Type 2
JIS-G 3106 SM 490 A
BSEN 10025 S 355 JR / S 355 J2G3
Can/CSA-G40.21-M-92-300W/44w
}
 10 to 60
Other Parameters  
 
  Thickness

8 to 12 mm : Maximum 5% Above 40 mm : Maximum 10%
  Thickness
Width Range
  Above 9 mm upto 15 mm
2600 to 2750 mm
  Above 15 mm upto 20 mm
2000 to 2750 mm
  Above 20 mm
1500 to 2750 mm
  Above 20 mm
1500 to 2750 mm
  Above 2750 upto 3200 mm available in thickness range of 16-32 mm
  Length Range
5000 to 12500 mm
Packing : In bundles of 10-15 metric tonnes for plates upto 12 mm thickness. In loose condition for plates above 12 mm

  Technical Delivery Conditions :

  • All plates shall be supplied in Killed quality (Si-Al Killed)
  • All plates are supplied in unnormalised, as rolled condition
  • Smaller sizes such as 4’x8’, 5’x10’, etc. can be supplied through flame cutting
  • Thickness above 40 mm. shall be supplied with gas cut edges on all sides and with relaxed tolerance on flatness and waviness
  • Plates of 8 to 50 mm. thickness and upto 3000 mm. width in following grades can be supplied with 'CE' marking, “ U” marking and TUV certification; EN 10025 JR G2, S275 JR, S355 JR, S 355 J2G3 and S355 JO +AD 2000 W1 can be supplied upto 8 to 40 mm.
  • High tensile grades can be supplied upto 10% of the total order. Exclusive orders in these grades are not possible
  • Total no. of sizes : 25-30 for an order size of 5000 metric tonnes
  • Invoicing : Theoretical weight basis
  • Inspection : Plant inspection
  • Port of Loading : Visakhapatnam, India
  • The above range is only indicative and certain thickness x width x length even within standard range may not be possible for the mill
  • The above particulars are by way of general information only
  • Offers are subject to availability and confirmation of terms and conditions on case to case basis

 

Enquiries for SAIL’s carbon steel products may be sent to :
International Trade Division
Scope Minar Core-2, 17th Floor, LaxmiNagar District Center, Delhi - 110 092, India.
Tel. No. :+91-11-22505358 
Fax : +91-11-22507654 , 22514690
E-mail: editd@sail-steel.com